Alcorn Mcbride Digital Binloop HD, Руководство пользователя

Страница: 86 / 137

Alcorn McBride Binloop User’s Manual Page 76
Reproducer Status LED
Each reproducer has a single multi-color LED located directly above the
Compact Flash socket. The color and blink pattern of this LED signifies
the current state of the reproducer Here’s a table of those states and
the corresponding LED behavior:
LED State Reproducer State
Off
Stopped
Green
Playing
Orange
Paused, Stilled, or Searched
Red
Audio Muted
Flashing Red
Fault
Flashing Green
Power-on Initialization
Reproducer Test Button
Each reproducer has a test button located directly above the Compact
Flash socket. As you can probably tell from the name, this button is
intended only for testing purposes and not for normal operational
control. When this button is pressed, the reproducer reacts differently
depending on its current state.
Note: File Number 1 is
VID00001. Please refer to the
Media Files chapter in this
manual for further details on
file naming.
1. If the reproducer is stopped, pressing this button will cause the
lowest numbered file to start playing.
2. If the reproducer is playing, pressing this button will cause it to
stop playing.
3. If the reproducer is in a fault condition (status LED flashing
red), pressing this button will clear the fault.