Alcorn Mcbride Digital Binloop HD, Руководство пользователя

Страница: 85 / 137

Alcorn McBride Binloop User’s Manual Page 75
Display and Menu Wheel
The Binloop is equipped with 2x16 character Vacuum-Fluorescent
Display. This display is primarily used to indicate the current status of
the Binloop. Here’s an example of that status display:
The current SMPTE mode is indicated at the top-left of this screen. The
3 possible modes are displayed as
Gen , Gen* (Generate /w VSync), and
Read. The current state of the SMPTE generator/reader is displayed at
the bottom left, and the SMPTE frame rate is displayed at the bottom
right. The time at the top-right of the display represents the current
SMPTE timecode value in hours, minutes, seconds, and frames. In the
event that there is no current timecode value (meaning timecode is not
currently being read or generated), this time will be displayed as dashes
like the following example:
In addition to providing system status, the display can also be used in
conjunction with the nearby Menu Wheel to access the configuration
settings of the Binloop. To enter this menu, simply press in the menu
wheel.
Note: The menu wheel ‘clicks’
when rotated to provide tactile
feedback between selections.
After you do this, you can navigate through the various settings of the
Binloop by rotating the menu wheel to change the selection, and
pressing it to select the current item. When you are finished, simply
browse to the ‘Exit’ selection and push the menu wheel to return to
the status screen. To see a complete map of this menu interface,
refer to
Appendix D - Wheel Menu Map .