alchemy Alchemy RB1000, Инструкция по установке и эксплуатации

Страница: 23 / 40

23
8. Troubleshooting
8.1 There is smoke or a foreign smell coming from the Burner when burning
a. There may be waste burning that should not be in the Burner.
b. You are using the wrong fuel (it is essential that you ONLY use Bioethanol).
c. You have placed something around/above the flame that has not been approved or
recommended.
d. If the Burner is empty (the flame is dying) or you have just turned the fire OFF, this is normal.
Like extinguishing candles.
e. The quality of Bioethanol you are using is not good enough.
SOLUTION
Turn the Burner OFF and wait until it cools down. Clean/service the Burner and remove objects/
waste. Contact your local distributor for fuel brand recommendation.
8.2 When i attempt to light the Burner, it does not start
a. You have not put enough fuel in the Burner.
b. You have not used the right fuel (it is imperative that you ONLY use Bioethanol).
c. The Burner opening is obstructed, there needs to be adequate ventilation for the flame to start.
d. The Bioethanol is cold and takes time to ignite.
SOLUTION
Check -Stop Code – in the DEVICE menu on the handset for further guidance. Check fuel level by
inspection through the fuel tank window, check type of fuel used. Repeat starting procedure until
the Burner warms up and remains ignited.
8.3 i have spilt some fuel, what do i do before lighting?
Use the isolation switch to prevent the fire turning ON. Keep people away from the area. Wipe
up spilt liquid thoroughly using a dry cloth, wipe again with a cloth dampened with water. Avoid
breathing vapours. Ventilate enclosed space by opening windows and doors. If fuel got spilled on
hands, wash thoroughly. ONLY ignite when the area is completely dry and you are certain that all
spilt fuel has been removed. Please refer to MSDS for Bioethanol.
8.4 The flame is unusually volatile and high
This is likely to be caused by a strong draught blowing on the flame. Locate and remove the
source of the draught (it may be that you have a window/door open or fan operating that is directly
pushing air towards the fire). If you cannot remove the source of the draught and the flame is too
volatile, turn the fire OFF. You will need to rethink the positioning of your unit before operating
again or install a fire screen to minimise the draught effect. Contact your distributor.