Alcatel SpeedTouch 610, Руководство по эксплуатации

Страница: 43 / 56

2 The SpeedTouch™610 Web Interface
3EC 37770 AAAA TCZZA Ed. 02
39
2.6. System Config Tasks Links
Initial Setup
Clicking this button pops up the Initial Setup page.
This page allows to:
•
Configure a user defined IP address and (sub)netmask for the SpeedTouch™610.
Enter the IP address and (sub)netmask in the appropriate fields. Click Apply to
apply the changes.
System Setup Clicking this button pops up the System Setup page.
For more information, see the Topic System Setup in section
“2.2. Quick Tasks Links”
on page 23 .
Upgrade
Clicking this button pops up the Software- and Configuration Upgrade page.
This page allows to:
•
Upgrade the SpeedTouch™610 system software:
Therefore:
Step Action
1
Make sure no passive software resides on the SpeedTouch™610. If needed
click Remove Passive to remove the passive software version.
2
Browse to the location where the SpeedTouch™610 upgrade system software
resides. Therefore, click Browse.
Note: Upgrade software may be made available from your Service Provider.
Contact your Service Provider for more information.