Alcatel SpeedTouch 610, Руководство по эксплуатации

Страница: 19 / 56

1 SpeedTouch™610 Installation
3EC 37770 AAAA TCZZA Ed. 02
15
2
The following window invites you to select the appropriate connection profile
for your Internet connectivity:
Select the connection profile and click Next to continue.
Note: In case the Service Provider included a separate disk with a dedicated
connection profile, click Have Disk to navigate to the location of the appro-
priate connection profile file.
3
Subsequent screens will guide you through the configuration setup of both the
SpeedTouch

610 and/or your PC. Follow the instructions and enter the
required information where needed. This information should be provided by
your Service Provider.
Click Next each time to continue.
4
After configuring the SpeedTouch

610 it will restart. In some cases your PC
must be restarted as well for the changes to take effect:
5
At reboot of your PC the wizard will automatically pop up once more to
announce that the configuration procedure has been successfully completed.
Click Finish to close the wizard.
6
If multiple PCs on your local network need to be configured to enable access
to the SpeedTouch

610 you can either:
•
Re-run the SpeedTouch

Setup wizard on every PC
Or, if applicable:
•
Enable automatic IP address configuration (DHCP client) on every PC.
Step Action