Alcatel-Lucent 9500 MXC, Руководство пользователя

Страница: 718 / 916

Vol. VI-A-18 Alcatel-Lucent
• Use the To > Port tab to set (in numerical order) the first To port connection.
2. Click
Apply
.
The newly connected circuit is shown in the port-to-port connections box, and
the number of pass-through circuits is reduced accordingly.
• Continue to click Apply to establish subsequent new circuit connections
between the same modules . This connection is made in ascending numerical
order on the port numbers first established.
• To establish new connections between a different pair of modules, use the
From
and
To
module and port settings to define the first connection, and
then click Apply. Continue to click
Apply
to advance the connections.
3. When all connections have been set, click
Send
to save.
To view and name individual circuits:
1. Highlight the relevant RING, LINK or DAC module in the
Select a module
to view circuit connections
panel to show its ‘to’ connections in the
Port-to-port connections
panel.
2. In the
Port-to-port connections
panel, click the toggle down for the required
‘to’ module to view its port-to-port connection details. Refer to the Ring 3 to
DATA 2 example in Figure A-5 and Figure A-6.
3. To add or change a circuit name, highlight the existing name entry and type.
Figure A-6.
View of a Connection in the Port-to-Port Connections Box
To change existing circuits:
If there are no allocated circuits, the From and To buttons will prompt for bulk
allocation of circuits between the first pair of modules, with the number of
connections based on the lowest capacity end of the selected pair. For instance,
if a 32xE1 link has been selected as the From module and a 16xE1 DAC selected
as the To module, the From and To port buttons will prompt for a 16xE1 bulk
allocation. If such a bulk allocation is not intended, then select the 1st port-to-port
circuit using the Port drop-down menus, and proceed as above.
Item Description
1 Toggle down to view individual circuit details.
2 Highlight and type-over to enter a circuit name.
1
2