Alcatel-Lucent 7705 SAR Скачать руководство пользователя страница 289

Страница: 289 / 356

Event and Accounting Logs

7705 SAR OS System Management Guide

289

The

trap-target

command is used to add or remove a trap receiver from an

snmp-trap-group

. The

operational parameters specified in the command include:

•

the IP address of the trap receiver

•

the UDP port used to send the SNMP trap

•

SNMP version

•

SNMP community name for SNMPv1 and SNMPv2c receivers

•

security name and level for SNMPv3 trap receivers

A single

snmp-trap-group

log-id

can have multiple trap receivers. Each trap receiver can have

different operational parameters.

An address can be configured as a trap receiver more than once as long as a different port is used for
each instance.

To prevent resource limitations, only configure a maximum of 10 trap receivers.

The

form of the command removes the SNMP trap receiver from the SNMP trap group.

Default

No SNMP trap targets are defined.

Parameters

name —

specifies the name of the trap target, up to 28 characters in length

ip-address —

the IP address of the trap receiver. Only one IP address destination can be specified

per trap destination group.

Values

ipv4-address

a.b.c.d (host bits must be 0)

ipv6-address

x:x:x:x:x:x:x:x (eight 16-bit pieces)

x:x:x:x:x:x:d.d.d.d

x: [0 to FFFF]H
d: [0 to 255]D

port —

the destination UDP port used for sending traps to the destination, expressed as a decimal

integer. Only one port can be specified per

trap-target

statement. If multiple traps need to be

issued to the same address, multiple ports must be configured.

Values

1 to 65535

Default

162

snmpv1

snmpv2c

snmpv3 —

specifies the SNMP version format to use for traps sent to the

trap receiver

Note:

If the same

trap-target

name

port

port

parameter value is specified in more than one

SNMP trap group, each trap destination should be configured with a different

notify-

community

value. This allows a trap receiving an application, such as NMS, to reconcile a

separate event sequence number stream for each 7705 SAR event log when multiple event
logs are directed to the same IP address and port destination.

Содержание 7705 SAR




































































































































































































































































































































































Результаты поиска

Содержание 7705 SAR

Отзывы:

Похожие инструкции для 7705 SAR

Бренды по названию

Популярные бренды

Alcatel-Lucent 7705 SAR, Руководство по управлению системой

Результаты поиска

Содержание 7705 SAR

Отзывы:

Похожие инструкции для 7705 SAR

Бренды по названию

Популярные бренды