4
Configuration documentation
1
4
Edit notify screen
You can only access this screen if the handset has been previously registered to the selected system
•
Status
: allows the administrator to activate or deactivate the live signal, notification, key
events and status features.
•
Mode
: allows you to select Enterprise or Office mode. Depending on the selected mode,
the message will contain reduced or full location data. Only office mode can be used with
Office Communication solutions, while Office or Enterprise modes can be used with an
OmniPCX Enterprise call server, depending on the connection type between the call server
and the alarm server. Mode selection is performed once for all the notification features.
•
Acces1
,
Access2
: allows you to enter the two access prefixes of the trunk used to call the
server. First enter the main access and then the second or back-up access (if any).
Access programming is performed once for all the notification features.
•
Live delay
: allows you to enter the time between two signal messages sent by the handset.
1.3
How to program live calls
T
Access to the configuration menu
T
Activate the Live signal
Live signal calls are calls that are automatically made by the handset to the notification server. This
live signal is designed to notify the server that the phone has coverage and is working. A tick
indicates that the mode has been selected.
Edit notify
Enter the handset
administration code
Select one system
Edit notify
Status
Live
123
123
Password?
. . . .
123
SYSTEM 1
SYSTEM 2
Lock to any
400GEO-203
