Alcatel-Lucent 400 DECT Скачать руководство пользователя страница 9

Страница: 9 / 11

Configuration documentation

Activate the Status call

Status calls are calls that are automatically made by the handset to the notification server. As status

calls are made when the handset is put in the charger or removed from the charger, as well as

before power off or after power on, this feature notifies the server whether the user can be

reached or not. This may be used in the event of emergencies and the user may or may not be

called, depending on handset status.

Select the mode

The default mode is Enterprise.

Select Access

There is no default value and a maximum of four digits can be keyed in. Authorised digits are 0 to

9, * and #. If there is only one access, only access 1 must be keyed in, access 2 must left empty.

Behind Office communication solutions (office mode) only up to 3 digits are allowed.

Edit notify

Status

Edit notify

Mode

Enterprise

Office

Edit notify

Access1

Access2

Enter the prefix to access the trunk

line or security personel set in

fallback mode

Содержание 400 DECT












Результаты поиска

Содержание 400 DECT

Отзывы:

Бренды по названию

Популярные бренды

Alcatel-Lucent 400 DECT, Локализация и управление уведомлениями

Результаты поиска

Содержание 400 DECT

Отзывы:

Бренды по названию

Популярные бренды