8088 Smart DeskPhone
8AL90342ENAAed01
14 /52
1.9
Installing a Bluetooth® Wireless Technology handset (pairing)
This feature is only available with compatible Bluetooth® deskphone. Otherwise the corresponding menu
is not displayed or is inactive.
Before a Bluetooth® headset can be used, it must be correctly paired to the terminal.
•
•
Bluetooth
•
Mark the Bluetooth® checkbox if it is unmarked.
•
With the handset turned off, press the 2 Bluetooth® handset keys at the same time (long
press).
You will hear a 3 note signal and the LED will flash green and orange alternately.
•
Searching for Bluetooth® equipment. Wait for the detected equipment type and address to be
displayed.
•
Select the relevant equipment. The handset is seen as a Bluetooth® headset.
•
The 3-note tone indicates that the handset has been installed correctly (the LED flashes green or
orange depending on the battery charge level). The LED flashes green or orange depending on the
battery charge level.
•
Go back to the Homepage.
1.10
Install a comfort wired handset
You can install a wired handset in place of the Bluetooth® Wireless Handset.
•
Remove the rubber.
•
Plug-in the wired handset to the appropriate connector
(refer to phone description).
•
Make sure you position the cable correctly in the
compartment intended for that purpose:
•
Switch off the Bluetooth® Wireless Handset (press and
hold the On/Off hook key until you hear distinct tones).
1.11
Broadcast the entire display of the phone
To broadcast the display of the phone on compatible HDMI equipment, just connect it to the phone via
the HDMI connector.
