alca 213000, Инструкция по эксплуатации

Страница: 6 / 12

ENGLISH ENGLISH
when storing the
compressor.
FOR SMALL INFLATABLES
1. Select the suitable adapter
and insert it into the
connector (Fig.5).
2. Please consult your
owner´s manual for exact
pressure rating.
3. Insert adapter into article
to be in fl ated (Fig. 5).
Close thumb latch
connector.
4. Plug power cord into
cigarette lighter recep
tacle (Fig. 3). Turn on
switch “OFF COM/PUMP
ON”.
5. When proper pressure is
reached, turn off switch,
unplug power cord.
6. Remove adapter from
in fl ated article and remove
adapter from connector.
TO INFLATE AIR MATTRESSES,
RUBBER BOATS ETC.
1. Use the plastic hose. Plug
the end of the hose to the
port labeled „In fl ation“
(Fig. 7). Select the suitable
adapter and connect it
to the adapter holder of
the hose.
2. Please consult your
owner´s manual for exact
pressure rating.
3. Insert adapter into article
to be in fl ated (Fig. 5).
4. Plug power cord into
cigarette lighter recep-
tacle (Fig. 3). Turn on
switch “OFF COM/PUMP
ON”.
5. When proper pressure is
reached, turn off switch,
unplug power cord.
6. Remove adapter with
hose from in fl ated article.
TO DEFLATE AIR MATTRESSES,
RUBBER BOATS ETC.
1. Use the plastic hose. Plug
the end of the hose to
the port labeled
„De fl ation“ (Fig. 7). Select
the suitable adapter and
connect it to the adapter
holder of the hose.
2. Insert adapter into article
to be de fl ated (Fig. 5).
3. Plug power cord into
cigarette lighter recep-
tacle (Fig. 3). Turn on
switch “OFF COM/PUMP
ON”.
4. When proper result is rea-
ched, turn off switch,
unplug power cord.
5. Remove adapter with
hose from in fl ated article.
TYPICAL INFLATION PRESSURE
Avoid overin fl ating. NEVER
EXCEED RECOMMENDED
PRESSURE. The item being in-
fl ated may burst and cause
serious injury.
TROUBLE SHOOTING:
Compressor does not start/
blows fuses
1. Push the power plug fi rmly
into the receptacle and
twist it back and forth.
2. Check receptacle and
plug terminals for dirt,
particularly tobacco. Use
a nonconductive probe,
not fi ngers or metal.
3. Check vehicle lighter
fuse. Should be 15 amps
minimum.
Compressor runs but does
not in fl ate
1. Be sure the connector
always touches the core
of the valve stem.
Fig. 1 Fig. 2
Fig. 3 Fig. 4
Fig. 7
open
close
2
1
3
Fig.5
Fig. 6
1. adapter for in fl atables
2. sportball adapter
3. adapter for bycicle
lock valve stem
connector