albutt F301, Инструкция и каталог запасных частей

Страница: 10 / 15

1.4 GENERAL OPERATING INSTRUCTIONS
F352
1) Drive up to the bale and fully open the arm.
2) Drive in until the back of the bale is against the bottom tube of the handler and lower
until the top tube is resting on the top of the bale.
3) Operate the hydraulics to clamp the bale. Lift the bale and crowd so the bale is supported
by the back frame. DO NOT LIFT ANY BALES WHICH ARE UNSUPPORTED BY THE BACK
FRAME.
4) Before moving ensure the desired path is clear. Only ever travel in a path which is
known to be clear and never allow the bales and handler to come within 10m of a
bystander.
5) To place the load, position the bale very close to the destination before returning the bale
to horizontal to prevent bale tipping off prematurely. Gently place down the bale and
when the load is taken by the floor/trailer/other bales, release the hydraulics and reverse
out gently. If the bale begins to move adjust attachment position as necessary to prevent
dragging. Do not drop the bale from any height, this may result in personal injury or
damage to the bale.
www.albutt.com | 01242 620 252 | keith@albutt.co.uk