albutt F301, Инструкция и каталог запасных частей

Страница: 9 / 15

1.4 GENERAL OPERATING INSTRUCTIONS
F410 & F450
1) Drive up to the bale and fully open the arms.
2) Drive in until the bale is up against the back frame.
3) Operate the hydraulics to gently squeeze the bale.
4) Lift the bale and crowd so the bale is supported by the back frame.
DO NOT LIFT ANY
BALES WHICH ARE UNSUPPORTED BY THE BACK FRAME.
5) Before moving ensure the desired path is clear. Only ever travel in a path which is
known to be clear and never allow the bales and handler to come within 10m of a
bystander.
6) To place the load, position the bale very close to the destination before returning the bale
to horizontal to prevent bale tipping off prematurely. Gently place down the bale and
when the load is taken by the floor/trailer/other bales, release the hydraulics and reverse
out gently. If the bale begins to move adjust attachment position as necessary to prevent
dragging. Do not drop the bale from any height, this may result in personal injury or
damage to the bale.
7) When not carrying a bale, the F410 must be fully closed during travelling. When travelling
on the road, transport the F410 on a trailer. If this is not possible, ensure it is carrier in the
lowest possible position with the arms fully closed.
www.albutt.com | 01242 620 252 | keith@albutt.co.uk