Albrecht GP 1, Инструкция по эксплуатации

Страница: 24 / 38

User Manual Albrecht GP 1
24
6.5.3.1.Review a track
To review a track
•
Highlight the TRACKS field using the Up/Down wheel key switch; then press
Enter. You will see the list of individual tracks. Up to 5 tracks can be saved with
date and time. Each track can contain up to 360 leg-points.
•
You can choose to review each track using by UP/DOWN wheel key.
•
With the track designation highlighted, press the Enter button to access the
review
TRACK display ; The selected track will be regenerated on the display.
This pictorial representation of the track does not contain any data coordinates
related to the MAP page.
Any of TRACK options can be accessed using the Up/Down switch; when the desired
option is highlighted, you can perform the following tasks:
•
TRACKBACK : Start Your trip back along the track on the map to the
start point
•
DELETE a single track.
•
Press PAGE to return to the TRACKS field
Other options:
•
CLEAR ALL - This function will remove all stored tracks from the memory.
•
Press PAGE to return to the GPS MENU page.
6.5.4. Receiving of GP LOCATOR data via radio link
The GP LOCATOR field is used to display the coordinates received from other GP 1 units. According
to the European regulations, only manual initiated “selective calling” systems are allowed in the PMR
446 system. GP 1 combines User ID transfer with acoustical alarm beep, displaying of ID code and
position data transmission, all together transmitted in a less than 2 seconds long data burst. If a
partner station within Your radio communication range, on the same channel and with the same
CTCSS code transmits his ID code and position data, a GP locator window will open automatically at
all receiving stations.
You will then be asked to save, ignore or to show the partner’s position relative to Your position on a
map.
Following display appears when the GP LOCATOR is received.