Albrecht GP 1, Инструкция по эксплуатации, Страница: 16 / 38

User Manual Albrecht GP 1
16
5.3.4. Roger Beep setting
The PMR-GPS will transmit a beep tone sequence after each transmission to signal the
receiving party that transmission has ended.
To select the roger beep
•
Highlight the “ROGER BEEP” field and press ENTER
•
Use the UP/DOWN wheel key to select the “ON” or “OFF”.
•
Press ENTER.
5.3.5. Squelch tail elimination circuit
Whenever you transmit, the receiving party on the same channel will hear the short buzz,
referred to as the “Squelch tail” when you finish the transmission. The unit can be set to
suppress this noisy by using the SQ TAIL option.
To select squelch tail elimination:
•
Highlight the “SQ TAIL” field and press ENTER
•
Use the UP/DOWN wheel key to select the “ON” or “OFF”.
•
Press ENTER.
Note: This „squelch tail elimination“ is a special software feature which is only
available in Albrecht GP 1 and Tectalk-FM radios. Other radios may not have this
function.
6. GPS Information Pages
All interesting informations available from GPS can be found on the different information pages
(
PAGES ).
•
RADIO+GPS STANDBY PAGE
•
LOCATION PAGE
•
MAP PAGE
•
POINTER PAGE
•
GPS MENU PAGE
•
SETUP PAGE
To scroll through these pages, press the
PAGE button on the right side of the GP 1. If You hold the
PAGE button pressed for longer than 1.5 seconds, the System Menu page will open. You can use
the UP/DOWN as a cursor to move through the System Menu page.
Depending on the selected mode (GPS only, GPS+RADIO or RADIO only) 3 different STANDBY
PAGES may appear. In this chapter we will describe these STANDBY PAGES and 4 Information
pages.diesem
6.1. Standby Pages
These pages depend on the selected modes.
6.1.1. Radio + GPS Standby page
This page appears after switching on automatically. You will see following informations:
•
In the upper field You see the User Identification (USER ID – max. 8 characters). In the chapter
about basic settings You have learned how to edit the User ID.
•
Number of received satellites (depending on weather, air, surrounding conditions and antenna
position).
•
Satellite signal strength information bar graph.
•
Time format settings (12 hrs or 24 hrs system).
•
Selected radio operating channel.
•
PMR CTCSS-Subcode-Selection.