Albrecht AE 500 H, Руководство пользователя

Страница: 15 / 18

To complete the setting, press CLEAR PROGRAM key.
Changing Light Operation
The light stays on for 5 seconds after the Light key is released. The Light operation can be changed so that it
remains on until the Light key is pressed again.
Hold down FUNC key and press 0 SET Key.
Turn the selector to change Set menu to display
„
nor LAmP
“
. (Illust. 43)
Hold down FUNC key and turn the selector to change the display from
„
nor
“
to
„
tGL
“
.
To complete the setting, press CLEAR PROGRAM key.
To turn the light on, hold down FUNC key and press 1 LIGHT key
To turn the light off, hold down FUNC key and press 1 LIGHT key
Turning the Beep On or Off
Whenever a key is pressed, and when the power is switched on, the receiver generates beeping sound. This beep
sound may be turned off with following procedure.
Hold down FUNC key and press 0 SET Key.
Turn the selector to change Set menu display to
„
on bEEP
“
. (Illust. 44)
Hold down FUNC key and turn the selector to change the display from
„
on
“
to
„
OFF
“
.
To complete the setting, press CLEAR PROGRAM key.
Using the Battery Save Function
In order to extend the battery life, the amount of current consumed by the receiver can be reduced. This is called
Battery Save. The length of time for the Battery Save may be selected from 0 to 9 seconds.
Hold down FUNC key and press 0 SET Key.
Turn the selector to change Set menu to display
„
OFF SA
“
. (Illust. 45-1)
Hold down FUNC key and turn the selector to change the display from
„
OFF
“
to select the time setting.
(Illust. 45-2)
To complete the setting, press CLEAR PROGRAM key.
The SAV indicator is displayed at all times when this function is activated.
Using the Auto Power Off
This receiver allows you to turn the power off automatically after approximately 30 minutes of no reception or no key
operation. A warning beeps one minute before the power is automatically turned off.
To set the Auto Power Off
1. Hold down FUNC key and press 0 SET Key.
2. Turn the selector to change Set menu to display
„
OFF APO
“
. (Illust. 46-1)
3. Hold down FUNC key and turn the selector to change the display from
„
OFF
“
to
„
on
“
.
(Illust. 46-2)
4. To complete the setting, press CLEAR PROGRAM key.
The APO indicator is displayed at all times when auto power off is activated.
Switching the Set Mode Function Simply (My Key) ;
A frequently used Set Mode can be stored in the 4 MY key. In the initial state, the frequency step is stored in this key.
How to Store the selected SET MODE into MY key
Hold down FUNC key and press 0 SET key.
Turn the selector to change the Set menu display to be stored. (Illust. 47)
Hold down FUNC key and press 4 MY key.
To complete the setting, press CLEAR PROGRAM key.