7.3.8.1
If the firmware of the machine includes the Pay-Out Table option, by which the amount of tokens
delivered for different levels of POS paid money can be set, the display will allow the User to choose and
purchase only among the preset payment levels. See setting flow-chart in section 7.3.5.3
DISPENSING
MODE SETUP.
Pay attention: Pay-out Table will work in Automatic Mode only!
7.3.9
Language setup
7.3.10
Promo
It is possible to preset an advertisement on the display. Press OK:
Press again OK, the pointer will highlight the first digit: by UP or DOWN, choose the character that
you want to insert, then confirm by OK. The pointer will highlight the following digit.
Once digit no. 16 has been confirmed, the message gets stored.
7.3.11
Modify PIN
The PIN code allows to get access to the discretional menus of the system.
The PIN code is made up by 4 figures (each of them from 0 to 9: 10,000 combinations available).
If the entered PIN is not correct, the User is given another 4 tries before the board gets blocked-up
by its security interlock. The system can be started again by switching it off and on again.
ATTENTION: the default PIN code is 0000
The settings in the following menus can be modified by using the PIN code:
MODIFY PIN - RESET ACCOUNTS - RESTORE DEFAULT CONFIGURATION
To modify the existing PIN, press OK, and digit the old PIN code: to digit each code figure, first
use keys UP and DOWN to set each figure, then confirm it by OK. Once the 4
th
figure has been
confirmed, confirm by OK the whole old PIN:
To enter the new PIN code, use first the UP and DOWN keys to set each figure, then confirm it by
OK. Once the 4
th
figure has been confirmed, confirm by OK the whole new PIN.
As every single figure gets confirmed, an asterisk takes its place, so preserving secrecy.
NOTICE: when DEFAULT CONFIGURATION is restored, the PIN code gets reset to 0000.
LANGUAGE
SETUP
Seleziona lingua
ITALIANO
Choose language
ENGLISH
Waehlen Ihre Sprache
DEUTSCH
Digit text
------------------------
New PIN
0
Enter PIN
0
MODIFY PIN
