14
D
ISPLAY
(*)
D
ISPLAY LAST
EVENT
(*)
D
ATE AND
T
IME
C
ASH
W
ITHDRAWAL
K
EYS
WITHDRAWAL
(*) Reserved to
Master key only
RESTRICTED MENU
Key
initialized!
Antenna
initialized!
Enter PIN
0
7.3.5.3
S
ET
U
P
C
ASHLESS
(only if the ACS reader is built-in)
If the unit is equipped with the ACS reader, it is possible to get access to useful functions:
Operation
Master Card/Key
(black) for the owner
Service Card/Key
(white) for the manager
Operator Card/Key
(yellow)
1. Initialize RFID Card/Keys
YES
YES (no Master Card/Ky)
NO
2. Enable white key to collect money
YES (from Menu)
NO
NO
3. Check Accounts (totals and partials)
YES
YES (partials only)
NO
4. Print Accounts
YES
NO
NO
5. Reset Accounts Data
YES
YES (partials only)
NO
6. Reset of paid residual credit
YES
YES
NO
7. Access to (optional) manual Refill
YES
YES
NO
8. Collect money if key is enabled
YES (max 500€)
YES (max. 200 €)
NO
The Master Card/Key allows to initialize the Service and Operator Cards/Keys from the reader.
Whenever the Master Card/Key or the Service Card/Key gets access to the Accounts menu, the data shown
get automatically downloaded in the Card/Key. Each Card/Key can contain up to 10 downloaded sets.
These data
sets can be read and stored to PC via the ACR Programming Station (K-P4N-000007) and sw.
When entering this menu, the display will request to initialize the Card/Key reader (antenna).
Work out one 6 digits PIN code, write it down and keep it in a safe place.
Insert the Master Card/Key and press the OK button: you will be prompted
to enter the PIN code. Insert the 6 digits PIN. To enter each of the 6
digits, make use of the UP and DOWN buttons. When the desired
character is displayed, confirm it by the OK button.
After entering the 6th character, the display will prompt for confirming the PIN code. Enter it again:
initialization of the Card/Key reader will start.
When finished, the confirmation message appears (see beside):
Insert now the Master Card/Key: the machine 4-digit pin code (see section 9.3.13 Change PIN)
will be requested; enter it to get the Master Card/Key initialized.
Once the process is complete, the confirmation message appears:
To initialize the Service and/or the Operator Card/Key, exit the menu, put the Master Card/Key in
the reader, and navigate the menu by + until finding R
ESTRICTED
M
ENU
: press OK, and navigate
again until I
NITIALIZE CARDS/KEYS
, then press OK. Insert the Operator Card/Key and follow the
instructions displayed:
Insert Operator
Card/Key (yellow)
Wait……
Remove the
initialized
Card/Key
To initialize User Cards/Keys and load credit onto them, see section 6.1.
7.3.5.3b Restricted menu
(reserved to owners of Master Card/Key and of Service Card/Key)
When inserting the Master or the Service Card/Key in the reader, the pushbuttons SEL 2 and OK
light up green. By touching SEL 2, it is possible to navigate the following options:
Refill Banknotes, Refill Coins, Accounts, Restricted menu, Exit.
By SEL, navigate to:
and press OK. The following functions will be available:
I
NITIALIZE
(**)
(***)
E
NABLE CASH
(**) Master can create Service and Operator
Keys; Service can create Operator Keys
(***) Reserved to Master
only, enabling Service Key
only
Card/Key
initialized!
Do not remove the
Card/Key
Initial. Operator
Card/Key
