Alberici Hammer Two, Руководство оператора

Страница: 14 / 22

14
7.3.11 L
ANGUAGE SETUP
7.3.12 M
ODIFY
PIN
The PIN code allows to get access to the discretional menus of the system.
The PIN code is made up by 4 figures (each of them from 0 to 9), so that there are 10,000
combinations available.
If the PIN code is not correct, the User is given another 4 tries before the board gets blocked-up by
its security interlock. The system can be started again by switching it off and on again.
ATTENTION: the default PIN code is 0000
The settings in the following menus can be modified by using the PIN code:
MODIFY PIN - RESET ACCOUNTS - RESTORE DEFAULT CONFIGURATION
To modify the existing PIN, press OK, and digit the old PIN code: to digit each code figure, first
use keys UP and DOWN to set each figure, then confirm it by OK. Once the 4
th
figure has been
confirmed, confirm by OK the whole old PIN:
To digit the new PIN code, use first the UP and DOWN keys to set each figure, then confirm it by
OK. Once the 4
th
figure has been confirmed, confirm by OK the whole new PIN.
As every single figure gets confirmed, an asterisk takes its place, so preserving secrecy.
NOTICE: when DEFAULT CONFIGURATION is restored, the PIN code gets reset to 0000.
7.3.13 E
XIT
M
ENU
Press OK to go back to stand-by condition:
LANGUAGE
SETUP
Seleziona lingua
ITALIANO
Choose your language
ENGLISH
Waehlen Ihre Sprache
DEUTSCH
New PIN
0
Enter PIN
0
MODIFY PIN
EXIT MENU
Exit Menu
in progress…
CHANGEONE
Promo