Alberici AL66 FG ARM Pulse, Руководство оператора

Страница: 7 / 36

5. Installation
The AL66 FG is a 3,5” coin acceptor. It is interchangeable with the coin acceptors of the same type
(compatible entries and exits of the coins) available on the market.
PAY ATTENTION! The coin selector must be installed 90°-95° with respect to level plane. Because of the
built-in advanced security system, it is essential that the whole coin path gets not hindered.
Alberici is not responsible for any malfunctioning due to lack of compliance with such recommendations.
Various models of front entries are available, to whose bracket the coin mechanism gets firmly hooked.
The KZ, KP, KA, SZ, and SP face plates are designed to be mounted outside the installation panel. The
KB, KI, KF, CP and NP plates can be fitted both externally and internally. The PP introduction is specially
designed to be mounted inside, so that the slots are flush with the external profile of the panel.
KZ, KP, KA KB, KI, KF
SZ, SP CP
MOUNTING of the “S-TYPE COIN ACCEPTOR (FACE PLATES)
DIMENSIONS