7
2 Receiving and Acceptance Testing
This section describes the receiving and initial testing of the Cellcorder.
2.1 Unpacking
Upon receipt of the Cellcorder, inventory all contents of the shipment. If there is
any visible damage to the case or box, notify the freight carrier immediately for a
damage claim. Unless otherwise noted, shipment of the unit is F.O.B.
Boca Raton, Florida. Any shipping damage claims must be made by the
purchaser directly to the freight carrier.
The Cellcorder is designed to provide many years of service. The components of
the Cellcorder are like those in a computer, and proper care should be provided
when handling. The carrying case will help protect the unit from minor bumps
during daily use.
Verify that all contents are in the box and carrying case. Each system should
include the materials described in
Cellcorder Parts List
. This equipment has
passed several phases of quality control; however, if any of the contents are
missing, contact Albércorp immediately.
2.2 Cellcorder Initial System Test
Connect the AC adaptor to the POWER port on the rear of the Cellcorder, then
plug the adaptor into a wall receptacle. The CHARGE indicator should light. Do
not connect any other leads to the unit at this time.
Press the ON key on the front of the Cellcorder. After a series of beeps and a
system self test, the unit defaults to the Cellcorder Main Menu:
_ _MAIN MENU_ _ _ *
1 - MODE SELECT
2 - DIAGNOSTICS
3 - SETUP
NOTE: An asterisk ( * ) on the top right of the menu indicates memory
configuration is 7 x 256.
