Ambient Temperature Sensor Connection
4200-106
13-1
Revision 3
13.
Ambient Temperature Sensor
Connection
There is one ambient temperature sensor included with each unit. This sensor comes with a
prefabricated harness with 25
’
,
50’, 75’ or 100’
of cable. Route the cable to the desired location to
capture ambient room temperature and plug the connector into the rear of the unit.
Note
: The UXIM device comes with one single temperature harness. A dual harness can be purchased
through your Vertiv Sales representative. Either a single or dual harness can be used on the UXIM.
Figure 11 - 25',
50’, 75’ or 100’
Single and Dual Ambient Temperature Harness
