Albatross AlbaCombi, Руководство пользователя

Страница: 38 / 65

34
Name: please write down the alarm’s name

Output Type: you have 3 options:
o
Manual: You can switch on/off the relay
o
NMEA2000: allows to act on a device connected to the NMEA network
when the alarm is activated
o
Alarm: the alarm up and down values are only to be configured on screen.
Limits high/low: these limits have already been configured in the “Channel Option”.

Activation Rule: You can choose the condition for which the alarm is activated.
3.5 “N2K” Option
In this section you must configure the PGN signal you want to send through the NMEA network
to your plotter
PGN 127488 – Engine Parameters, Rapid Update (2)
PGN 127489 – Engine Parameters, Dynamic (2)
PGN 127493 – Transmission Parameters, Dynamic (2)
PGN 127505 – Fluid Level (4)
PGN 127508 – Battery Status (3)
PGN 130314 – Pressure (3)
PGN 130316 – Temperature, Extended Range (1)
PGN 130576 – Trim Tab Status (1)