Albatross AlbaCombi, Руководство пользователя

Страница: 19 / 65

15
click on the drop-down menu next to “Configure IPv4” and select “Using DHCP with
manual address”, but you can also use full manual mode by choosing “Manually”
6) Select a static IP that will not conflict with anything else on the network.
7) IPv4 address: The first three sets of digits should match. For this tutorial, we will use for
example, IP address 192.168.0.75, but it will valid other IPs if the first three digits are
192.168.0.XXX. The third value could any from 0 to 255, excluding the value 50 which is
the IP of the AlbaCombi.
AlbaCombi works by default in the IP 192.168.0.50, you can’t use this IP.
Subnet mask: The subnet mask between the device that you are trying to connect to
needs to be the same as your PC. We will use subnet mask 255.255.255.0
Router: 192.168.0.1