KX400+ series mainboard
55
When not disabled, each of the ranges is from 1 min. to 1 hr. except for HDD Power
Down, which ranges from 1 min. to 15 min. and disable.
HDD Power Down
When enabled, the hard disk drive will power down after a certain configurable
period of system inactivity. All other devices remain active. Options: Disabled
(default)
、
1 Min
、
2 Min
、
3 Min
、
4 Min
、
5 Min
、
6 Min
、
7 Min
、
8 Min
、
9 Min
、
10 Min
、
11 Min
、
12 Min
、
13 Min
、
14 Min
、
15Min
Suspend Mode
This item allows you to select the suspend type using the ACPI operating system.
Options: Disabled (default)
、
1 Min
、
2 Min
、
4 Min
、
6 Min
、
8 Min
、
10 Min
、
20 Min
、
30 Min
、
40 Min
、
1 Hour
Video Off Option
This field determines when to activate the video off feature for monitor power
management.
Options: Suspend
→
Off (default), Always On.
Video Off Method
This option determines the manner in which the monitor is goes blank.
Options: V/H SYNC+Blank (default)
This selection will cause the system to turn off the vertical and horizontal
synchronization ports and write blanks to the video buffer.
Blank Screen: This option only writes blanks to the video buffer.
DPMS Support: Initial display power management signaling.
Modem Use IRQ
This determines the modem’s IRQ. Options: 3 (default)
、
4
、
5
、
7
、
9
、
10
、
11
、
NA.
Soft-Off by PWRBTN
Pressing the power button for more than 4 seconds forces the system to enter the
Soft-Off state when the system has “hung.” Options: Delay 4 Sec, Instant-Off
(default).
Wake Up Control
If you highlight the literal “Press Enter” next to the “Wake Up Control” label and then
press the enter key, it will display a submenu with the following options:
