KX400+ series mainboard
52
AC97 Audio
This option allows you to control the onboard AC97 audio.
Options: Auto (default)
、
Disabled
Onboard Audio Codec
This option allows you to control the onboard audio codec.
Options: Enabled (default)
、
Disabled
AC97 Modem
(with KX400+ & KX400+ PRO)
This option allows you to control the onboard AC97 modem.
Options: Auto (default)
、
Disabled
USB Controller
This option should be enabled if your system has a USB port installed on the system
board. You will need to disable this feature if you add a higher performance controller.
Options: Enabled (default)
、
Disabled
USB Device Support
Enables support for USB attached keyboards. Options: Disabled (default)
、
Enabled
Super IO Device
If you highlight the literal “Press Enter” next to the “Super IO Device” label and then
press the enter key, it will take you a submenu with the following options:
Onboard FDC Controller
Select Enabled if your system has a floppy disk controller (FDC) installed on the
system board and you wish to use it. If you install anadd-in FDC or the system has
no floppy drive, select “Disabled” in this field. Options: Enabled (default)
、
Disabled
Onboard Serial Port 1
Select an address and corresponding interrupt for the first serial port.
Options: Disabled
、
3F8/IRQ4 (default)
、
2F8/IRQ3
、
3E8/IRQ4
、
2E8/IRQ3
、
Auto
Onboard Serial Port 2
Select an address and corresponding interrupt for the second serial port.
Options: Disabled
、
2F8/IRQ3 (default)
、
3F8/IRQ4
、
3E8/IRQ4
、
2E8/IRQ3
、
Auto.
UART Mode Select
This item allows you to select the Infra Red (IR) standard to be used of onboard I/O
chip. Options: Normal (default)
、
AS KIR
、
IrDA.
