KX400+ series mainboard
48
IRQ Resources
When resources are controlled manually, assign each system interrupt a type,
depending on the type of device using the interrupt. This is only configurable when
“Resources Controlled By” is set to “Manual”.
IRQ-3 assigned
to:
PCI
device
IRQ-4 assigned
to:
PCI
device
IRQ-5 assigned
to:
PCI
device
IRQ-7 assigned
to:
PCI
device
IRQ-9 assigned
to:
PCI
device
IRQ-10 assigned
to:
PCI
device
IRQ-11 assigned
to:
PCI
device
IRQ-12 assigned
to:
PCI
device
IRQ-14 assigned
to:
PCI
device
IRQ-15 assigned
to:
PCI
device
PCI / VGA Palette Snoop
Some graphic controllers that are not VGA compatible take the output from a VGA
controller and map it to their display as a way to provide boot information and VGA
compatibility. Options: Disabled (default)
、
Enabled
PCI Latency Timer (CLK)
This item allows you to set up the PCI Latency Time (0-255). If you select the 32 PCI
Clock it will optimize PCI speeds. Options: 0-255
、
32 (default)
PCI1/2/3/4/5/6 IRQ Assignment
This item allows you to assign the PCI Slot’s IRQs.
Options: Auto (default)
、
3
、
4
、
5
、
7
、
9
、
10
、
11
、
12
、
14
、
15
