Mainboard KN800
9
Hardware Installation
This section will assist you in quickly installing your system hardware. Wear a wrist ground
strap before handling components. Electrostatic discharge may damage the system’s
components.
FAN Headers: FAN1 (Optional)
There is one fan header available for cooling fans. This cooling fan plays an important role in
maintaining ambient temperatures in your system.
Memory Installation: DIMM1
The KN800 provides one DDR SO-DIMM socket which allows you to install 200-pin DDR 400
SO-DIMM, supporting to install a total memory capacity of 1 GB.
Memory Installation Steps:
1. Match the notch on the bottom of the DIMM module with the corresponding pattern in
the DIMM slot. This will ensure that the module will be inserted with the proper
orientation. Now the chips or pins at the bottom of the DIMM module are still visible.
Pin
Assignment
1 Ground
2 Power
(+12V)
1
FAN1
3
FAN RPM rate sense