Mainboard KN800
15
Clear CMOS Jumper: JP2
The “Clear CMOS” function is used when you are unable boot your system and need to reset
the BIOS settings (CMOS settings) back to the manufacturer’s original settings. This is also a
way to reset the system password if you have forgotten it.
JP2
Assignment
Pin 1-2 Closed
Normal (Default)
Pin 2-3 Closed
Clear CMOS Data
Note:
“Closed” means putting a jumper cap onto two adjacent header pins.
1. Turn off your system and disconnect the AC power cable.
2. Set JP2 header to OFF (2-3 Closed).
3. Wait several seconds.
4. Set JP2 header to ON (1-2 closed).
5. Connect the AC power cable and turn on your system.
6. Reset your new password.
Slot
Mini PCI Slot: MINI_PCI
Mini PCI (Peripheral Component Interconnect) is a 32-bit, 33MHz bus standard for integrated
peripherals of smaller products. The mainboard provides one Mini PCI slot available to install
expansion cards such as network card, SCSI card, etc.
The following steps explain how to reset your CMOS configurations
when you forgot a system password.
