KM400T-8X Series
29
PnP/PCI Configurations
P
When set to “YES”, BIOS will only initialize the PnP cards used for the boot sequence (VGA, IDE,
SCSI). The rest of the cards will be initialized by the PnP operating system like Windows
®
95. When
s
e PnP cards. For non-PnP operating systems (DOS, Netware),
t
O
R
ta
S
n
uration has caused such a serious conflict that the OS cannot
boot. Options: Disabled (default)
、
Enabled
R
BIOS can automatically configure all the boot and Plug and Play compatible devices. If you choose
lly assign IRQ DMA and memory base address fields, since
、
Manual
I
W
rrupt a type, depending on
t
is is only configurable when “Resources Controlled By” is
set to
I
PCI
device
I
I
IRQ-7
assigned
to:
PCI
device
assigned
to:
PCI
device
Q-14
assigned
to:
PCI
device
device
ome graphic controllers that are not VGA compatible take the output from a VGA controller and
ap it to their display as a way to provide boot information and VGA compatibility. Options:
abled (default)
、
Enabled
NP OS Installed
et to “NO”, BIOS will initialize all th
his option must be set to “NO”.
ptions: No (default)
、
Yes
eset Configuration Da
elect “Enabled” to reset the Extended System Configuration Data (ESCD) if you have installed a
ew add-on card and the system reconfig
esources Controlled By
Auto, you will not be able to manua
BIOS automatically assigns them. Options: Auto <ESCD> (default)
RQ Resources
hen resources are controlled manually, you can assign each system inte
he type of device using the interrupt. Th
“Manual”.
RQ-3
assigned
to:
RQ-4
assigned
to:
PCI
device
RQ-5
assigned
to:
PCI
device
IRQ-9
IRQ-10
assigned
to:
PCI
device
IRQ-11
assigned
to:
PCI
device
IRQ-12
assigned
to:
PCI
device
IR
IRQ-15
assigned
to:
PCI
PCI / VGA Palette Snoop
S
m
Dis
