KM400T-8X Series
Hardware Installation
This section will assist you in quickly installing your system hardware. Wear a wrist ground strap
before handling components. Electrostatic discharge may damage your system components.
CPU Processor Installation
This mainboard supports AMD
®
Athlon XP
TM
/ Athlon
TM
/ Duron
TM
/ Barton
TM
processors using a
Socket A (Socket 462 Pin package). Before building your system, we suggest you visit the AMD
website and review the processor installation procedures. http://www.amd.com
CPU Socket A Configuration Steps:
1.
Locate the CPU socket on your mainboard and nudge the lever away from the socket. Then lift
the lever to a 90-degree angle.
2.
On the socket, locate the corner that has the pin-1 receptor. This corner will be near to the end
of the lever. Match the corner on the CPU with the pin-1 receptor on the socket and lower the
CPU onto the socket. The bottom of the CPU should be flush with the face of the socket.
Pin-1
Receptor
Corner
3.
Lower the lever until it snaps back into position. This will lock down the CPU.
4.
Smear thermal grease on top of the CPU. Lower the CPU fan onto the CPU and use the clasps
on the fan to attach it to the socket. Finally, extend the power cable from the fan and insert it
onto the CPUFAN adapter.
8
