KM400T-8X Series
27
Precharge to Active (Trp)
You can set the time to precharge. Options: 5T (default)
、
2T
、
3T
、
4T
Tras Non-DDR400/ DDR400
Active to Precharge Delay.
Active to CMD (Trcd)
delay time when being read. Options: 5T (default)
、
2T
、
3T
、
4T
This item determines DRAM Command Rate.
and
ort (AGP) aperture. The aperture is a portion of the
AGP without any translation.
Options: 1G
、
512M
、
256M
、
128M
、
64M (default)
、
32M
、
16M
、
8M
、
4M
hen you install 8X AGP card.)
the item will be lock in 8X option.)
will automatically set the AGP output buffer drive strength.
By choosing “Manual”, it allows user to set the AGP output buffer driver strength.
set to “Manual”, it allows the user to set AGP Driving
AGP Fast Write
s the CPU to write directly to the graphics card bypassing the
This item allows you to select DRAM
Options: 7T/10T (default)
、
6T/ 8T
Select the DRAM
DRAM Command Rate
Options: 2T Command (default)
、
1T Comm
AGP & P2P Bridge Control
age for AGP & P2P Bridge Control.
Press <Enter> to enter next p
AGP Aperture Size
Select the size of the Accelerated Graphics P
PCI memory address range dedicated for graphics memory address space. Host cycles that hit the
aperture range are forwarded to the
(The 1G and 512M options only appear w
AGP Mode
This item allows you to select the AGP Mode. Options: 1X
、
2X
、
4X
、
8X
(*If you install the 8X AGP card, then
AGP Driving Control
By choosing “Auto” the system BIOS
AGP Driving Value
While the AGP Driving Control option is
Value. Options: DA (default)
、
00~FF
The AGP Fast Write technology allow
system AGP 4X speed. Choose “Enable” only when you used with AGP card support. Options:
Disabled (default)
、
Enabled
