KM400A Series
41
VGA
When set to “On”, any event occurring at a VGA Port will awaken a system which had been
hen this option is set to On, any event occurring at a COM(serial)/LPT (printer) port will awaken a
ctivity or a floppy drive activity will awaken
e system which had been previously suspended. Options: ON
、
OFF (default)
”, you need a LAN add-on card which supports the power on function. It should also
ME signal from any PCI card will awaken the system from suspend
ing Wake Up
n the system upon receiving an incoming call to a modem device.
”, you can se
s
This field is on
igurable when “RTC
esume Time (hh: mm: ss)
ou can choose the hour, minute and second the system will boot up. This field is only configurable
hen “RTC Wake Up” is set to “Enabled”
previously powered down. Options: OFF (default)
、
On.
LPT & COM
W
system which has been suspended.
Options: LPT/COM (default)
、
COM
、
LPT
、
NONE
HDD & FDD
When set to “On”, any event occurring on a hard drive a
th
PCI Master
When set to “On
support the wake-up on LAN jumper. Options: OFF (default)
、
ON
PCI PME Wake Up
When you select “Enabled”, a P
mode. Options: Disabled (default)
、
Enabled
R
This option allows you to awake
Option: Disabled (default)
、
Enabled
RTC Wake Up
t the date and time at which the RTC (real-time clock) alarm awaken
When “Enabled
the system from Suspend mode. Options: Enabled
、
Disabled (default)
Date (of Month)
You can choose which month the system will boot up.
ly conf
Wake Up” is set to “Enabled”
R
Y
w
