KM400A Series
36
Onboard Lan Boot ROM
This item allows you to invoke the boot ROM of the onboard LAN chip.
ptions: Disabled (default)
、
Enabled
SB Controller
his option should be enabled if your system has a USB port installed on the system board. You will
eed to disable this feature if you add a higher performance controller.
ptions: All Enabled (default)
、
All Disabled
nChip EHCI Controller
his option should be enabled if your system has a USB 2.0 device installed on the system board.
eed to disable this feature if you install a USB 1.1 device.
ptions: Enabled (default)
、
Disabled
SB Device Support
nables support for USB attached devices. Options: Disabled (default)
、
Enabled
Device” label and then press the enter
ey, it will take you a submenu with the following options:
-in FDC or the system has no floppy drive, select “Disabled”
nabled (default)
、
Disabled
elect an address and corresponding interrupt for the first serial port.
3F8/IRQ4 (default)
、
2F8/IRQ3
、
3E8/IRQ4
、
2E8/IRQ3
、
Auto
elect an address and corresponding interrupt for the second serial port.
RQ3 (default)
、
3F8/IRQ4
、
3E8/IRQ4
、
2E8/IRQ3
、
Auto.
278/IRQ5
、
3BC/IRQ7
、
Disabled
O
U
T
n
O
O
T
You will n
O
U
E
Super IO Device
If you highlight the literal “Press Enter” next to the “Super IO
k
Onboard FDC Controller
Select Enabled if your system has a floppy disk controller (FDC) installed on the system board and
you wish to use it. If you install an add
in this field. Options: E
Onboard Serial Port 1
S
Options: Disabled
、
Onboard Serial Port 2
S
Options: Disabled
、
2F8/I
Onboard Parallel Port
This item allows you to determine the parallel port interrupt and address.
Options: 378/IRQ7 (default)
、
