KM400A Series
39
3. User Defined (default)
Allows you to set each mode individually.
When this option is enabled, the “suspend mode” time is
. and includes a “disable”
configurable from 1 minute to 1 hour. The
option.
y
the “HDD Power Down” value and the
D wn
k drive will power down after a certain configurable period of system
remain active.
6 Min
、
7 Min
、
8 Min
、
9 Min
、
、
12 Min
、
13 Min
、
14 Min
、
15Min
his item allows you to select the period of inactivity before the system is suspended or put into
in
、
2Min
、
4Min
、
6Min
、
8Min
、
10Min
、
20Min
、
30Min
、
40Min
、
r management.
ptions: Suspend
→
Off (default), Always On.
his option determines the manner in which the monitor goes blank.
Options:
V/H SYNC+Blank(default) This selection will cause the system to turn off the vertical and
horizontal synchronization ports and write blanks to the video buffer.
Blank Screen
This option only writes blanks to the video buffer.
DPMS
Support
Initial
display
power management signaling.
Modem Use IRQ
This determines the modem’s IRQ. Options: 3 (default)
、
4
、
5
、
7
、
9
、
10
、
11
、
NA.
HDD Power Down, which ranges from 1 min. to 15 min
Note: If ou select Min. or Max. Power Saving modes,
“Suspend Mode” value are both fixed.
HDD Power
o
When enabled, the hard dis
inactivity. All other devices
Options: Disabled (default)
、
1 Min
、
2 Min
、
3 Min
、
4 Min
、
5 Min
、
10 Min
、
11 Min
Suspend Mode
T
suspend mode.
Options: Disabled(default)
、
1M
1Hour
Video Off Option
This field determines when to activate the video off feature for monitor powe
O
Video Off Method
T
