KM400A Series
30
DRAM CAS Latency
This item determines CAS Latency. When synchronous DRAM is installed, the number of clock
cycles of CAS latency depends on the DRAM timing. Do not reset this field from the default value
pecified by the system designer. Options: 1.5
、
2
、
2.5
s
、
3
s: 5T
、
2T
、
3T
、
4T
ou t
A
ptions: 7T
、
6T
、
8T
、
9T
4T
ol
Size
e Accelerated Graphics Port (AGP) aperture. The aperture is a portion of the PCI
ycles that hit the aperture
t any translation.
ptions: 1G
、
512M
、
256M
、
128M (default)
、
64M
、
32M
、
16M
、
8M
、
4M
ou install 8X AGP card.)
t the AGP Mode. Options: 1X
、
2X
、
4X (default)
If you install the 8X AGP card, then the item will be lock in 8X option.)
set the AGP output buffer driver strength.
Precharge to Active (Trp)
You can set the time to precharge. Option
Active to Precharge (Tras)
This item allows y
o select DR M Active to Precharge Delay.
O
Active to CMD (Trcd)
Select the DRAM delay time when being read. Options: 5T
、
2T
、
3T
、
DRAM Command Rate
This item determines DRAM Command Rate.
Options: 2T Command (default)
1T Command
、
AGP & P2P Bridge Contr
Press <Enter> to enter next page for AGP & P2P Bridge Control.
AGP Aperture
Select the size of th
memory address range dedicated for graphics memory address space. Host c
range are forwarded to the AGP withou
O
(The 1G and 512M options only appear when y
AGP Mode
This item allows you to selec
(*
AGP Driving Control
By choosing “Auto” the system BIOS will automatically set the AGP output buffer drive strength. By
choosing “Manual”, it allows user to
AGP Driving Value
While the AGP Driving Control option is set to “Manual”, it allows the user to set AGP Driving
Value. Options: DA (default)
、
00~FF
