Albany RapidRoll 355, Руководство по механическому монтажу и эксплуатации

Страница: 22 / 23

21 Manual #6410T0021 1/5/2011
Electrical Installation: Yes No
Were the factory supplied cables (motor, encoder & 7 – wire) cables long enough?
If No, which cables were too short?
If No, was Albany Customer Support contacted and new cables sent?
Were the schematics easy to read for electrical hook-up?
What type of conduit was used to route the cables to the door?
Is the conduit routed to the bottom of the control box?
If “No” did the customer approve this?
If “No,” why?
If “Yes,” who was the customer contact that approved?
Door Start-up Yes No
Was the door start-up procedure easy to follow?
If No, what problem(s) did you run into?
Was Albany Customer Support Dept. notified of these issues?
Is the Reversing Edge working?
Are the front and rear light curtains (or photo-eyes) working?
Do the bottom bar breakaway switches work?
Does the door’s self-repair feature work when the door is broken away?
If the door has counterweights, does the egress work?
Activation
What type of activation is being used?
Was the activation supplied by Albany?
Did the customer approve of the mounting and operation of the activators?
Comments