Rev. 4/9/2010
Manual #001449
4
High Speed Doors
Operation
Product description
Function and design of this door
The model Re-Coil-Away is a vertically opening door.
Principle
The door assembly consists of left and right side frames and a header assembly. The header as-
sembly contains the curtain and the drive system already attached. The bottom beam is already at-
tached to the curtain. Door comes standard with a balance system and also available as an unbal-
anced option.
The Re-Coil-Away door rolls the curtain material directly on and off a barrel assembly. The edges of
this curtain are contained within the side frames via a patented windlok system while the curtain is
being rolled or unrolled off the barrel. These side frames guide the curtain also and provide a seal.
The bottom beam, located on the bottom of the curtain, contains a continuously monitored electrical
safety edge. Activation of this device will stop the door and cause the door to reverse to a fully open
position. The door also has a reversing photocell attached to the side frames of the door.
Control Unit
The Re-Coil-Away may be driven with the control unit ACS-50, UltraSmart or PLC with contactors.
The maximum opening speed depends on the size of the door and type of motor. See applicable
control panel manual for door operation and electrical troubleshooting guides.
Electric safety features
The Re-Coil-Away door utilizes a minimum of two safety features. This is comprised of safety photo-
cells and electric reversing edge.
Additional Safety systems
Depending on the kind of application it may be useful to have additional sensors as safety features.
This is especially true for a door with a high volume of human traffic or with low sized doors with a
height under 10 feet (3m).
Albany Door Systems offers a variety of safety systems for high-speed doors. Some examples could
be any of the following: Light beam barriers, motion detectors, induction loops. For any other electri-
cal requirement contact us at the factory.
Drives
The Re-Coil-Away is operated with an electrical drive. Drive side is chosen by the end-user. The
drive system could be either 1-speed or 2-speed depending on door size and customer require-
ments. The drive systems come in 3 different operating voltages: 208-240VAC, 440-480VAC, and
550-600VAC.
Содержание PosiDrive M&I
