background image

 

Manual #001449 

Version 4.2 

UltraTough M&I, UltraBig M&I, PosiDrive M&I High Speed Doors 

EXCLUSIVE LIFETIME SBR FABRIC WARRANTY

 

Albany Door Systems

 warrants to the original owner of the door that the

 

styrene-butadiene rubber

 (

SBR) 

fabric

 

door 

panel (curtain)

 

will be free of defects in materials and workmanship for the 

lifetime

 of the door. Door panels (curtains) 

made of EPDM are warranted for a period of 

five (5) years

. This warranty covers material failure under normal wear condi-

tions; it does not cover labor, polyethylene terephthalate (PET) weave, windlok, roll strips, and windows after the first 

twelve (12) months

.  Use of petroleum-based products on the door panel (curtain) will void this warranty. 

              ONE-YEAR WARRANTY 

ON MECHANICAL AND ELECTRICAL COMPONENTS 

Albany  Door  Systems

  warrants  to the original owner  of  the  door  that  the  mechanical  and  electrical  components  will be 

free from defects in material and workmanship for a period of

 one (1) year

 from the date of shipment.. The warranty does 

not cover fuses, heat lamp elements, bulbs, seals and straps. 

 

Only defects brought to the attention of 

Albany Door Systems

 during the warranty period will be covered by this warranty. 

 

Albany  Door  Systems 

will  replace  component  parts  covered  by  this  warranty,  which  are  found  to  be  defective  upon in-

spection by an 

Albany Door Systems

 representative. Installation or use of parts other than those authorized by 

Albany 

Door Systems

 will void this warranty. 

 

PARTS AND ASSEMBLIES sold separately by 

Albany Door Systems 

that fail due to defects in material or workmanship 

within 

ninety (90) days 

from the date of shipment will be replaced under warranty provided installation has been carried 

out in accordance with all 

Albany Door Systems 

procedures. This warranty is limited to providing a replacement part only. 

This warranty does not cover freight, special charges, or any costs associated with the installation of the replacement part. 

 

This warranty covers material failure under normal wear conditions; it does not cover damage caused by collision or other 
abuse of the product. Adjustments made to the control panel or to the mechanical operation of the door without the authori-
zation  of 

Albany  Door  Systems

  will  void  this  warranty.  Any  changes  made to  product configuration  without  the  express 

written approval from Albany Door Systems may null and void this warranty.  

 

Albany  Door  Systems’ 

obligations  under  this  warranty  are  limited  to  repairing  or  replacing  the  defective  part  including 

labor  and 

Albany  Door  Systems

  shall  not  be  responsible  for  any  other  losses  or  damages  due  to  the  operation  of  any 

door  or  parts  covered  by  this  warranty.    Warranty  parts  will  be  shipped  regular  ground  freight  at  the  expense  of  Albany 
Door Systems.   
 

This warranty shall be void in its entirety if the failure of any product shall be caused by any installation, operation, or main-
tenance of the product which does not conform with the requirements set forth by the seller in the applicable product 
manuals or is in the result of any cause other than a defect in the material or workmanship of the product.

 

No other oral or written representations made by 

Albany Door Systems

 or its agents are a part of this warranty unless 

specifically set forth in writing by an authorized

 Albany Door Systems

 official.

 

 

 
 

THE ABOVE SET FORTH WARRANTY IS SELLER'S SOLE WARRANTY. SELLER MAKES NO OTHER WARRANTY 

 

OF ANY KIND WHATSOEVER, EXPRESSED OR IMPLIED; AND ALL IMPLIED WARRANTIES OF MERCHANTABIL

 

ITY AND FITNESS FOR A PARTICULAR PURPOSE WHICH EXCEED THE AFORESTATED OBLIGATION ARE 

 

HEREBY DISCLAIMED BY SELLER AND EXCLUDED FROM THIS AGREEMENT. 

 

WARNING 

Do not install, operate or service the product unless you have read and understand  
the safety practices, warnings, installation and maintenance instructions contained  

in this manual.  

 

Albany Door Systems - A Company of Albany International Corp. All Rights Reserved 
1080 Maritime Drive, Port Washington, WI 53074 - 975-A Old Norcross Road, Lawrenceville, Georgia 30045  
262-268-9885 or 877-9252468 
v4202010 

STATEMENT OF WARRANTY 

Содержание PosiDrive M&I



































Отзывы: