Albalá Ingenieros DAT3000C01, Руководство пользователя, Страница: 17 / 38

Albalá Ingenieros | Manual DAT3000C01
3.7. Interconnection
The following figure shows the DAT3000C01 module rear board connector layout.
Rear view of the DAT3000C01
The DAT3000C01 module provides two loop-through inputs (STREAM 1 LOOP IN and
STREAM 2 LOOP IN) and two outputs (OUT1 and OUT2) for each digital audio section. It
also provides two loop-through inputs (AES/EBU REF. LOOP IN and REFERENCE IN
(BB/WCLK)) for reference signals and one input for a delay signal (TTL DELAY).
The rear interconnection board is not designed to withstand mechanical stress. The
wiring must be fastened properly to the frame where the mounting frame is housed to
prevent the rear board from supporting the weight of the cables.
3.7.1. Digital audio connections
Digital audio inputs are balanced and use 3.81mm pitch terminal block connectors.
The AES/EBU reference input provides loop-through but can be terminated with
17