Page 6
Electrical Connection
Any electrical work that is required to install
this appliance MUST be carried out by a qualified
electrician.
Before making any electrical connections, ensure the
following:
• Do not bend, stretch or pull the supply cable in order
to avoid electric shock .
• The supply voltage should be the same as that
indicated in the technical specifications and the
appliance rating plate .
• When installed, the power socket must be within easy
reach .
• If the socket outlets in your home are not suitable for
the plug supplied with this unit check with a qualified
electrician for replacement .
• The use of multiple connectors or extension cables
are not recommended .
• The appliance must be connected to a 220-240 volt
50Hz AC supply by means of a three pin socket .
• The main plug is used as the disconnect device, the
disconnect device shall remain readily operable .
• In order to disconnect the apparatus from the mains
completely, the mains plug should be disconnected
from the mains socket outlet completely .
Mains plug replacement (UK, Ireland)
Should you need to replace the plug; the wires in the
power cable are coloured in the following way:
Blue:
– Neutral
‘N’
Brown:
– Live
‘L’
E
L
N
BLUE TO
NEUTRAL
BROWN
TO LIVE
CORD
GRIP
FUSE
As the colours of the wires in the power cable may not
correspond with the coloured markings identifying the
terminals in your plug, and proceed as follows:
The blue wire must be connected to the terminal that is
marked with the letter N .
The brown wire must be connected to the terminal that
is marked with the letter L .
If power supply cord is damaged, it must replaced by the
manufacturer or its service agent or a similar qualified
person in order to avoid a hazard .
Installation
