For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
15
Getting Started
How to watch a DVD
1. Press the Power Button “” on the TV or remote
control.
2. Switch to DVD source using the “SOURCE”
button on the remote control.
3. Insert a disc into the loader.
The disc MUST be facing you when looking at the
TV screen (
fi
g.3).
Most discs will be automatically loaded and play
will start automatically if the disc does not have
any menus recorded on it.
If play does not start automatically, press the play
button “ ” on the remote control, or the play button
“
/
” on the right side of the TV.
A menu may appear on the TV screen after a few
moments or the
fi
lm may start immediately after the
Film/TV Company introduction. This will depend on
the disc content and may differ on each disc.
NOTE
: Steps 4 and 5 are only available when a
menu is recorded on the disc.
4. Press the navigation buttons “
” , “
” ,“ ” or
“ ” or the number button/s to select the required
title.
5. Press the
OK
button. The selected item starts
to play.
Notes on DVD Playback
a.
No sound will be heard during Rapid advance
or Rapid reverse.
b.
No sound will be heard during Slow motion
play.
c.
Reverse Slow motion play is not available.
d.
In some cases, the subtitle language will not be
changed immediately to the selected one.
e.
When the preferred language will not select,
even after pressing the button several times, it
means the language is not available on the disc.
f.
When the DVD player is restarted or the disc
is changed, the subtitle selection is automatically
changed back to the initial settings.
g.
If a language is selected that is not supported by
the disc, the subtitle language will automatically be
set to the disc’s priority (default) language.
h.
Usually a ‘circulation’ will happen while switching
to another language, this means you can cancel the
subtitle by pressing the same button a number of
times until “Subtitle Off” appears on the screen.
i.
When the power is turned on or the disc is
removed, the language heard will be the one
selected at the initial settings.
j.
Some DVDs may not contain root and/or title
menus.
k.
Reverse stepping is not available.
l.
For reference: If you attempt to enter a number
greater than the total time of the current title, the
time search box disappears and “Input Invalid ”
message appears on top-left corner of screen.
m.
The slide show is disabled when the ZOOM
mode is on.
MB60_[GB]_(TV-DVD)_[ARGOS]_woypbpr_1900UK_IDTV_BRONZE17_32947W_10076506_50206719.indd 15
01.12.2011 17:35:47
