11
[Step 2] Attaching the wrist strap
Attach the anti-static wrist strap to the wrist strap terminal.
NOTE
The wrist strap terminal on the Device is designed to use a 4-mm banana plug.
Use a wrist strap with a 4-mm banana plug terminal.
[Step 3] Connecting the operation terminal
1.
Connect the operation terminal to the console port. Use an RS232C crossover cable to connect
the operation terminal.
2.
Start the operation terminal.
3.
Start the communication software.
NOTE
For details about how to configure the communication software, see the
documentation for the communication software.
[Step 4] Connecting the interface cables
Connect the interface cables to the interface ports.
[Step 5] Turning on the power
Turn on the circuit breaker on the power input unit that corresponds to the mounted power supply
unit.
For details about the installation location of the power input units corresponding to the power supply
units, see
Table 2-1
.
