10
2.1.2 Details of the installation steps
[Step 1] Connecting a power cable
When using the Device with AC power
Connect the 100 V AC or 200 V AC power cable to the power connector of the power input unit
that corresponds to the mounted power supply unit.
For details about the installation location of the power input units corresponding to the power
supply units, see the following table.
Table 2-1 Correspondence between power supply units and power input units
Power supply unit
Power input unit
PS1 PSINPUT1
PS2 PSINPUT2
PS3 PSINPUT3
PS4 PSINPUT4
PS5 PSINPUT5
PS6 PSINPUT6
When you connect the Device to the AC power supply, use a grounded
power outlet. Using the Device without grounding might result in electric
shock, as well as a failure due to electrical noise.
Use a designated power cable. Using a power cable other than the
designated one might result in a fire or electric shock. In addition, do not use
a designated power cable with another device. Doing so might result in a fire
or electric shock.
Before connecting or disconnecting a power cable, turn off the circuit breaker
on the power input unit of the target power input unit.
When using the Device with DC power
Connect the
−
48 V DC power cable to the power input unit that corresponds to the mounted power
supply unit.
For details about connecting a -48 V DC power cable, see the
AX8600R Hardware Instruction
Manual
.
For details about the installation location of the power input units corresponding to the power
supply units, see
Table 2-1
.
NOTICE
W A R N I N G
W A R N I N G
