⑤ Lock key (LOCK)
A push of a Lock key locks all the keys except POWER SW
①
which prevents erroneous operations.
Switch OFF to release the lock.
⑥ Upper Limit Value Key (H)
Switch on Upper Limit Value Mode.
Set to an optional numerical value with a numerical value setting key
④
.
⑦ LCD Display
Measuring Modes, measuring values, upper limit setting, temperature compensating, battery residue and so on
are to be indicated on the LCD.
⑧ Probe connector receptacle
This is a connector to be hooked up to a probe.
⑨ Hand strap
To protect this instrument from dropping, make sure that the hand strap be hung through over an operator’s
wrist.
⑩ Battery Case (back Lower part of a main body)
Batteries are to be placed.
3-2
Probe
Small type 2 needles probe
⑪ Probe Connector
⑫ 2 needle electrode
⑬ Needle fixing block
⑭ Hexagon socket set screw for needle fixing
⑮ Handle
⑯ Probe Cord
Office: Jl. Radin Inten II No. 62 Duren Sawit, Jakarta 13440 - Indonesia
Workshop: Jl. Pahlawan Revolusi No. 22B, Jakarta 13430 - Indonesia
Phone: 021-8690 6777 (Hunting)
Fax: 021-8690 6777
Mobile: +62 816 1740 8925
