FEEDER ASSEMBLY PARTS LIST
ABOUT THE AUGER FEED SYSTEM
7
1. Feed Motor
2. Auto Heat Control Box
3. Auger
4. 6 Piece Grate System
5. Ash Dump Plate
6. 2 Speed Combustion Blower
7. Auger Hub
8. Auger Shaft Collar
9. Motor Stop Support Bracket
10. Ash Ring
11. Pot Casting
13. Hopper Casting
14. Combustion Blower Shut Off Switch
The Auger Feed System
is capable of burning
rice coal
or
wood pellets
. The fuel is fed from the
hopper
through the
auger
and out of the
burn pot
. Unburned
fuel residue is either blown out of the pot by the
2 speed
blower
or forced out by fresh unburned coal.
ADJUSTING THE FIRE SIZE
The fire size is regulated by the
Auto Heat Box
. The box
is numbered.
The approximate minimum fire number
is 1. The knob may be turned higher than the 5th
setting as long as hot or burning coals are not being
forced off the edges of the grate.
This is the
approximate highest fire setting.
