8
Lock Defaults for DL6100
Users added
will default to a Group Association and a Programming Level ability as follows:
USER TYPE
USER NUMBER
GROUP DEFAULT
ASSOCIATION
MINIMUM PROGRAM
LEVEL (See page 6)
Master Code
1
-
M
Installer Codes
2 & 3
none
4
Manager Codes
4 - 6
none
3
Supervisor Codes
7 - 9
none
2
(Reserved) 10
-
11
none
--
Basic User Codes
12 - 50
none
none
Basic User Codes Group 1
51 - 100
1
none
Basic User Codes Group 2
101 - 150
2
none
Basic User Codes Group 3
151 - 200
3
none
Basic User Codes Group 4
201 - 250
4
none
Basic User Codes
251 - 296
none
none
Quick Enable User 300 Code
297
none
none
(Reserved--see page 7)
298
none
none
Guard Tour Code*
299
none
none
Service Code
300
none
none
Basic User Codes
301-5000
none
none
*This code is a
Non-Pass
code and therefore does not allow passage through the door.
The Programming Level defines the range of programming
tasks a User is allowed to perform. The higher the Level, the
more programming tasks the User is allowed (with Master al-
lowing ALL tasks).
Note:
Since the Programming Level is closely associated with
the type of User and their abilities, a User who holds a certain
Programming Level is sometimes referred to by their “
User
Type
”.
For example, DL6100 Series locks can hold up to 5000 Users
in its programming memory, and each User is associated with
a User Number (see definition of "User Number" in the previ-
ous "Terminology" section) and therefore a specific Program-
ming Level, as follows:
Master:
Always associated with User number 1. Is always
enabled and can program all functions. (Abbreviated as
Programming Level = M).
Installer:
Always associated with Users 2 and 3. Can pro-
gram all functions except changing the Master Code.
(Abbreviated as Programming Level = 4).
Manager:
Always associated with Users 4, 5, and 6. Can
program all functions except functions relating to lock
configuration. (Abbreviated as Programming Level = 3).
Supervisor:
Always associated with Users 7, 8 and 9. Can
only program functions relating to day to day operation.
(Abbreviated as Programming Level = 2).
Print Only Users:
In previous versions of the ALARM LOCK
Trilogy series locks,
Print Only Users
were always
associated with User Numbers 10 & 11 and were restricted
to printing event logs only, using a special AL-IR1
handheld printer. With the DL6100 series wireless lock no
longer requiring (or allowing) the use of this AL-IR1 printer,
Print Only Users
are also no longer required. Although the
attributes of User Numbers 10 and 11 have been changed
to replicate those of "Basic Users", to ensure compatibility
with previous lock model versions the use of User Num-
bers 10 and 11 with the DL6100 lock is not recommended.
Basic Users:
Always associated with User number 12 and
higher (except 297-300). No programming ability allowed.
Programming Levels are hierarchical--higher levels are al-
lowed to do anything the levels below them can do. For exam-
ple, if you are a
Manager
, you are allowed to do anything that
Supervisors
and
Basic Users
can do in addition to those tasks
allowed for Managers (Level 3).
Programming Levels
