ALARM CONTROLS CORPOR ATION
“QUALITY SECURITY EQUIPMENT SINCE 1971”
19 BRANDYWINE DRIVE, P.O. BOX 280, DEER PARK, NEW YORK 11729
1 800 645-5538 631 586-4220 FAX 631 586-6500
EMAIL: [email protected] WWW.ALARMCONTROLS.COM
MODEL KP-400 DIGITAL KEYPAD
FOR ACCESS CONTROL APPLICATIONS
SPECIFICATIONS
OPERATING VOLTAGE: 12 OR 24 VOLTS AC/DC, AUTO SENSING
ACTIVE CURRENT DRAW : 100 MA. @ 12 VOLTS, 120 MA. @ 24 VOLTS
IDLE CURRENT: 10 MA. MAX. @ 12 VOLTS, 22 MA. MAX. @ 24 VOLTS
OUTPUT 1 CONTACT RATING: S.P.D.T., 5A. @ 28 VDC/120 VAC
OUTPUT 2 CONTACT RATING: S.P.D.T., 1A @ 28 VDC/120 VAC
TAMPER SWITCH CONTACTS: N/C DRY CONTACTS, 50 MA. MAX.
OPERATING TEMPERATURE: -4F TO 158F, ( -20C TO +70C )
AMBIENT HUMIDITY: 5 TO 95% RELATIVE HUMIDITY
ENVIROMENT: CONFORMS TO IP66 CODE, DUSTPROOF AND WATERPROOF FROM POWERFUL WATER SPRAY
EGRESS INPUT: NORMALLY-OPEN CONTACTS
100 USER CODES, OPERATES OUTPUT 1, CODE LENGTH FROM 4 TO 8 DIGITS
10 USER CODES, OPERATES OUTPUT 2, CODE LENGTH FROM 4 TO 8 DIGITS
KEYPAD LOCKOUT FEATURE, AFTER 10 FALSE CODE ENTRYS KEYPAD LOCKS FOR 30 SECONDS
RELAYS CAN BE SET FOR MOMENTARY OR LATCHING MODE
ADJUSTABLE RELAY ON TIME FROM 1 TO 999 SECONDS
KEYPAD BEEPER CAN BE SILENCED IF REQUIRED
KEYPAD CAN BE PROGRAMMED FOR OUTPUT ANNUNCIATION
DIE CAST METAL BACKLIT KEYS FOR VISIBILITY IN DARK AREAS
SURFACE MOUNT DIE CAST METAL BLACK POWDER COATED BACK BOX
TYPICAL WIRING DIAGRAM
KEYPAD FEATURES
12/24V
AC/DC
12/24V
POWER
SUPPLY
OUTPUT 2
EG
IN
OUTPUT 1
N/C
N/O
C
N/C
N/O
C
+
MAGNETIC
LOCK
ELECTRIC
STRIKE
N/C TAMPER SWITCH
CAN PROVIDE A REMOTE ALARM
SIGNAL.
DOOR SENSOR INPUT
CONNECTED TO A N/C MAGNETIC
CONTACT MOUNTED ON THE DOOR WILL PROVIDE THE
FOLLOWING FUNCTIONS:
DOOR AUTO RELOCK TO PREVENT “TAILGATING”
DOOR FORCED OPEN ALARM
DOOR PROPED OPEN ALARM
DOOR INTERLOCK, (MANTRAP), REQUIRES 2 KEYPADS
KEY ACTIVE OUTPUT
SWITCHES TO GROUND FOR 10
SECONDS WHEN A KEY IS PRESSED. CAN BE USED
FOR A REMOTE LED, BUZZER OR RELAY.
DURESS OUTPUT
SWITCHES TO GROUND WHEN A
DURESS CODE IS ENTERED. CAN BE USED FOR
REMOTE SIGNALING.
OUTPUT 1 INHIBIT
PREVENTS OUTPUT 1 AND EGRESS
BUTTON FROM OPERATING
INTERLOCK CONTROL OUTPUT
THIS OUTPUT IS USED
TO TO CONTROL A SECOND KEYPAD IN A INTERLOCK
SYSTEM TO PREVENT BOTH DOORS FROM OPENING AT
THE SAME TIME.
