Alarko SRS 20 Скачать руководство пользователя страница 11

Страница: 11 / 60

•

DO NOT LIGHT anything and do not SMOKE.

•

DO NOT TOUCH electric buttons, DO NOT SWITCH from on to off or off to

on position.

•

DO NOT ATTACH OR PULL OUT electric plugs.

•

DO NOT RING the bells.

•

DO NOT USE the telephone where the gas smell exists.

•

CONTACT YOUR GAS SUPPLIER AND FIRE BRIGADE and explain the

situation.

2.3 Warnings!

•

This appliance must only be used for the intended purpose of manufacture.

Alarko Carrier Sanayi ve Ticaret A.Ş. does not take any responsibility for

the damage or injury on persons, animals or objects caused by incorrect

installation, service or maintenance, use except for the intended purpose

or disobeying any of the warnings within this booklet.

•

Spaces allowed for installing a gas-fired boiler are defined by international

and/or local regulations and rules of gas distribution companies. You can

supply detailed information about those limitations from your installer. For

your own safety, do not ask the installer to install your boiler to prohibited

spaces.

•

Before gas installation, a suitable gas installation project has to be pre-

pared and approved according to the requirements of local gas distribu-

tion organization. After approval of local gas distribution organization and

precise application of installation, have your boiler commissioned by an

Authorized Service. Commissioning is a free service.

•

Do not let unauthorized people to interfere or service the boiler.

•

Gas conversion process (from natural gas to LPG or from LPG to natural

gas), if necessary, must be made by an authorized service only. Conver-

sion is paid by the end-user.

•

Keep flammable and combustible objects, either liquid or solid, away from

the boiler.

•

Do not use any spray, chemical solvent, chlorinated cleaner, paint or adhe-

sive near the boiler.

•

Do not place cooker near the appliance and protect the boiler from direct

vapor. The boiler is to be connected to an earthed 230 V 50 Hz electric sup-

ply.

•

To enable the frost protection function in winter when the weather tempera-

Содержание SRS 20





























































Результаты поиска

Содержание SRS 20

Отзывы:

Бренды по названию

Популярные бренды

Alarko SRS 20, Инструкция по установке и эксплуатации

Результаты поиска

Содержание SRS 20

Отзывы:

Бренды по названию

Популярные бренды