Alarko ACK2, Руководство по эксплуатации

Страница: 6 / 42

6
WARNINGS
x
This boiler must be installed in accordance with the rules in force only in
a well ventilated and frost free spaces.
x
All installation, assembly and maintenance work must be carried out
exclusively by fully trained, professionally qualified personnel and must
conform with this manual and the local codes and requirements of the
authority having jurisdiction, or in the absence of such requirements,
apply to the EEC directives and European norms (EN).
x
If the boiler is not used for the purposes other then specified in this
booklet and incorrect installation, commissioning and use can cause a
fire or explosion which may result property damage, personnel injury, or
loss of life.
x
Boiler is designed for hot water operation only (less then the boiling
temperature) and the system pressure must be according to the limited
operating pressure specified on the boiler name plate and in this booklet.
Heat transfer medium is water.
x
Boilers must be fired by gas or oil fuels specified in this manual and
boiler plate.
x
Boilers must be fired by a compatible burner certified to EN 676 (gas
firing) or EN 267 (oil firing) to comply with the boiler efficiency requirement
(92/42/EEC) directive and Appliances burning gaseous fuels (90/396/EEC)
directive.
x
This is a B
23
appliance so the flue gases must be connected to an
adequate draught chimney, without any flue gas leakage to the boiler
room.
x
It is essential that an appropriate pump is fitted in the circulation system
which must be kept in automatic operation at all the times when the
boiler in use.
x
The filling and make up water must be according to the specifications
given in this manual. Long term water treatment is essential to the
economic operation and life of both new and refurbished heating systems.
x
Never obstruct the ventilation openings to the boiler room for a safe and
efficient operation. An adequate air supply for combustion and ventilation
must be provided at all times.
x
Boilers should be installed on a non-combustible, smooth and level
foundation which is at least 150 mm high and according to these manual
and local codes.
x
Boilers must not be installed in areas where inflammable vapors and
materials are likely to e present. To avoid damage to the boilers,